|
Model Of Item : 6032cf Product Brand : Infinity
|
|||||||||||||||||||||||||||||||||||||
Infinity Reference 6032cf 6.5-Inch 180-Watt High-Performance Two-Way Speakers (Pair) |
 | The Infinity Reference SeriesInfinity's Reference Series has been engineered to deliver best-in-class performance for those looking to replace or upgrade their factory speakers. Features like Infinity's Plus One (patent pending) woofer cones and edge-driven-dome tweeters have helped position Infinity Reference as the number-one line of automotive loudspeakers for the past six years straight. |
 An ideal upgrade to your factory drivers. |
Infinity 6032cf Features
Plus One woofer cones
This patent pending technology deliver a cone with more surface area than competing models of the same size. The result is increased bass output and higher efficiency.
True Four Ohms
All Reference speakers feature two ohm voice coils. Original factory-installed speaker wiring in many cars is 18-22 gauge. This wire, and heating in the voice coil when power is applied, increase the impedance "seen" by the amplifier or head unit. The impedance of Reference Speakers has been adjusted to compensate for this increase and can be safely driven by any head unit.
Edge-driven textile dome tweeters
These are not commonly used w-domes, but fully-edge-driven domes like those found in better home audio speakers. The benefit is increased power handling and reduced distortion at high output levels. This technology also allows for better integration with the mid/woofer.
Unipivot
Infinity's Unipivot (patent no. 6,002,780) allows the tweeter to be pointed at the listener's location even when the speaker is mounted off axis. This optimizes the stereo image and ensures a more uniform response.
Tweeter level adjustment
The 6032cf also features a tweeter level adjustment located on the front of the speaker and can be set at the reference level of 0dB. If the speakers are located low in the doors or if you are looking for a brighter sound, set the tweeter at +3dB
Rubber surrounds
This material provides optimum cone-edge suspension and absorbs distortions that may travel up the cone edge, adding stronger low-end.
Infinity 6032cf Specifications
| Power Handling, RMS: | 60 Watts | |
| Power Handling, Peak: | 180 Watts | |
| Sensitivity (2.83V @ 1m): | 93dB | |
| Frequency Response: | 53Hz - 21kHz | |
| Impedance: | 2 Ohms | |
| Mounting Depth: | 2-1/16 inches (52 mm) |
About Infinity
Infinity was founded in 1968 on a unique blend of technology, performance, and design. Today, Infinity offers three tiers of automotive speakers comparable to the best home-audio components. Infinity Kappa Perfect, Kappa, and Reference Series speakers deliver performance that rivals the best the competition has to offer.What's in the Box
Infinity Reference 6032cf 6.5-Inch 180-Watt Two-Way Loudspeaker (pair), Installation Hardware, User ManualInfinity Reference Series Multi-element Options
Multi-elements are clearly the easiest way to upgrade your system. They consist of an integrated tweeter and midrange/woofer. These speakers are designed to fit right into your factory locations with few, if any modifications. Infinity offers two extremely compelling lines of multi-element loudspeakers. Our Reference Series represents perhaps the best value of any premium brand in its price range, and our Kappa Series multi-elements are simply spectacular. These speakers have won numerous awards for their incredible audiophile-grade performance. |  |  |  |
| Infinity Reference 3032cf 3.5-Inch 75-Watt Two-Way Loudspeaker | Infinity Reference 4032cf 4-Inch 105-Watt Two-Way Loudspeaker | Infinity Reference 5032cf 5.25-Inch 135-Watt Two-Way Loudspeaker | Infinity Reference 6032cf 6.5-Inch 180-Watt Two-Way Loudspeaker |
 |  |  |  |
| Infinity Reference 6432cf 4 x 6-Inch 120-Watt Two-Way Loudspeaker | Infinity Reference 6832cf 6 x 8/5 x 7-Inch 180-Watt Two-Way Loudspeaker | Infinity Reference 9632cf 6x9-Inch 300-Watt Two-Way Loudspeaker | Infinity Reference 9633cf 6 x 9-Inch 300-Watt 3-Way Loudspeaker |
- 6-1/2-inch two-way loudspeaker with 180 Watts peak power handling and 2 Ohm impedance
- Plus One woofer cones and durable rubber surrounds for increased bass output and higher efficiency
- Edge-driven textile dome tweeters for increased power handling and reduced distortion at high output levels
- Tweeter level adjustment and swivel positioning for optimizing sound and stereo image
- One-year warranty
Door Grill
Special for Best Deals Shopping for
Customer Review :
Infinity Reference 6032cf Speakers : Infinity Reference 6032cf 6.5-Inch 180-Watt High-Performance Two-Way Speakers (Pair)
i just installed these speakers in my 94 jeep grand cherokee limited. they replaced the drivers side and passenger side front door speakers.
the speakers do not come with connectors (for jeeps or any other vehicle).
since i was replacing the existing speakers, i cut the female connector off of the old speaker (cutting the wires that attach to the cone and coil allowed easier removal of the connector....you don't want to break the plastic snaps that hole both male and female connectors in place). after removing the male connector (door wiring harness) from the old female connector, i soldered the old female connector to the new infinity reference speakers. the speakers come with a basic attachment point that allows you to easily solder any connector to it. less than five minutes worth of work. snapped into the existing male connector for a sound check and all i had to do was mount the speakers to the door.
following the diagram for my model (6032cf) on their installation instructions was as easy as it was pictured. except....that there are no mounting screws included. for the jeep grand cherokee, you need four. the mounting adapter plate uses the three screws from the original speaker mounting tabs.
the jeep's infinity gold speakers have three mounting tabs, the infinity reference speakers have four mounting tabs. you need the adapter plate.
you need the four screws to attach the speaker to the mounting adapter, plus you have to drill four 3/16" holes into the door. the adapter plate, once in place acts as a guide for drilling these holes. there is plenty of room to drill into the doors speaker opening. the standard (and plentiful) jeep interior self tapping phillips head screws worked well.
removing the door paneling, removing the old speakers, installing the new speakers (soldering and drilling), and re-attaching the door panels, took less than 30 minutes for both doors.
tools i needed; small spatula (to remove door paneling), phillips head screw driver, wire snips, soldering iron (and a very small amount of solder, 3/16" drill bit, drill and four self tapping screws.
because the speakers mount at the bottom of the doors, i set the db switch to 3db (choice of 0db or 3db) and angled the tweeter up (you change the angle by twisting the tweeter).
although the base is less than i would prefer, the speakers are head and shoulders above the existing infinity gold speakers that come with the jeep grand cherokee limiteds. i believe the laredo's use the same speakers with a smaller magnet, so the difference would be even more noticeable.
the price makes these speakers an outstanding return on your investment.
i do not use the rear speakers, but the same procedures would be needed if i ever decided to replace them.
 |
Infinity Reference 6032cf 6.5-Inch 180-Watt High-Performance Two-Way Speakers (Pair)
Door Grill
cheapest deals price 's deals and discount
